The tilt meter graders and tractors
1 Principle of operation
PROBYTE tilt the display control system is intended for semi-automatic
road vehicles are the tilt angle indicator. The machine controls
users with different tones and lights to correct the tilt angle.
The device comprises a detachable sensor, digital display unit.
The target angle can be monitored with a digital display
display, the indicator lights and sounds.
Measuring range +/- 90 degrees or +/- 100% user selecting. 100% means an increase of 100 centimeters per meter. 90 degrees means a straight angle.
The measurement of the sensor cable may continue to the usual
XRL3 extension cable, for example. 8m.
The sensor cable with a male connector. The meter has a female connector
Sensor resolution: 0.3 degrees, resolution 0.1 degrees
or %. Calibrated area of +/- 30 degrees.
The display device has a two-line character LCD. The LCD has a backlight.
Display area ..0.0 -90.0 90.0 degrees Celsius or -100 .. + 100% is generally used, it is making road percentage scale. The percentage scale is 2222 times the angle scale.
The device guides the user to sounds and lights. The device provides a continuous sound and the green light if the sensor is higher than the target (Target). If senor circuit angle is less than the target red light is on and the device emits intermittent sound. The sound can be set off.
Operating voltage: 12 volts battery, power 0.3A, fuse 5 * 20mm 2A
The sensor electronic control reset push button.
Tavoitekulmapotentiometri +/- 5 degrees or percent
Hystereesisäätöalue target angle-of-range 0 to 1.25
Delay Adjust button update delay: 0.0 -5.0 seconds
The button setting and target-made potentiometer adjustment parameters device
Volume-button down sound volume.
Area Press the set button to start (degrees or%) change
Display Dimensions: 150 * 85 * 50 mm without adjustment knobs, weight 250g.
The sensor dimensions: 67 * 110 * 27mm 100 g
The mounting holes 107 * 12mm * 5mm